ASP

ASP代碼示例

,接口類型：達信通國際短信接口。
,賬戶注冊：請通過該地址開通賬戶http://sms.wx96.com/register.html
,注意事項：
,（1）調試期間，請仔細閱讀接口文檔；
,（2）請使用 用戶名(例如：cf_demo123)及 APIkey來調用接口，APIkey在會員中心可以獲取；
,（3）該代碼僅供接入達信通短信接口參考使用，客戶可根據實際需要自行編寫；


<%@LANGUAGE="VBSCRIPT" CODEPAGE="936"%>
<%

Response.Charset = "gb2312"

'

'asp UTF轉GB2312   將UTF8編碼文字轉換為GB編碼文字的asp代碼
function UTF2GB(UTFStr)
for Dig=1 to len(UTFStr)
   '如果UTF8編碼文字以%開頭則進行轉換
   if mid(UTFStr,Dig,1)="%" then
      'UTF8編碼文字大于8則轉換為漢字
     if len(UTFStr) >= Dig+8 then
        GBStr=GBStr & ConvChinese(mid(UTFStr,Dig,9))
        Dig=Dig+8
     else
       GBStr=GBStr & mid(UTFStr,Dig,1)
     end if
   else
      GBStr=GBStr & mid(UTFStr,Dig,1)
   end if
next
UTF2GB=GBStr
end function

'GB2312轉UTF8的asp代碼  將GB編碼文字轉換為UTF8編碼文字
Function toUTF8(szInput)
     Dim wch, uch, szRet
     Dim x
     Dim nAsc, nAsc2, nAsc3
     '如果輸入參數為空，則退出函數
     If szInput = "" Then
         toUTF8 = szInput
         Exit Function
     End If
     '開始轉換
      For x = 1 To Len(szInput)
         '利用mid函數分拆GB編碼文字
         wch = Mid(szInput, x, 1)
         '利用ascW函數返回每一個GB編碼文字的Unicode字符代碼
         '注：asc函數返回的是ANSI 字符代碼，注意區別
         nAsc = AscW(wch)
         If nAsc < 0 Then nAsc = nAsc + 65536
    
         If (nAsc And &HFF80) = 0 Then
             szRet = szRet & wch
         Else
             If (nAsc And &HF000) = 0 Then
                 uch = "%" & Hex(((nAsc \ 2 ^ 6)) Or &HC0) & Hex(nAsc And &H3F Or &H80)
                 szRet = szRet & uch
             Else
                'GB編碼文字的Unicode字符代碼在0800 - FFFF之間采用三字節模版
                 uch = "%" & Hex((nAsc \ 2 ^ 12) Or &HE0) & "%" & _
                             Hex((nAsc \ 2 ^ 6) And &H3F Or &H80) & "%" & _
                             Hex(nAsc And &H3F Or &H80)
                 szRet = szRet & uch
             End If
         End If
     Next         
     toUTF8 = szRet
End Function

'二進制轉換為十六進制的asp代碼
function c2to16(x)
    i=1
    for i=1 to len(x) step 4
       c2to16=c2to16 & hex(c2to10(mid(x,i,4)))
    next
end function

'二進制轉換為十進制的asp代碼
function c2to10(x)
    c2to10=0
    if x="0" then exit function
      i=0
    for i= 0 to len(x) -1
       if mid(x,len(x)-i,1)="1" then c2to10=c2to10+2^(i)
    next
end function

'十六進制轉換為二進制的asp代碼
function c16to2(x)
     i=0
     for i=1 to len(trim(x))
       tempstr= c10to2(cint(int("&h" & mid(x,i,1))))
       do while len(tempstr)<4
          tempstr="0" & tempstr
       loop
       c16to2=c16to2 & tempstr
    next
end function

function c10to2(x)
    mysign=sgn(x)
    x=abs(x)
    DigS=1
    do
       if x<2^DigS then
         exit do
       else
         DigS=DigS+1
       end if
    loop
    tempnum=x
    i=0
    for i=DigS to 1 step-1
       if tempnum>=2^(i-1) then
          tempnum=tempnum-2^(i-1)
          c10to2=c10to2 & "1"
       else
          c10to2=c10to2 & "0"
       end if
    next
    if mysign=-1 then c10to2="-" & c10to2
end function

'UTF8編碼文字將轉換為漢字
function ConvChinese(x)
    A=split(mid(x,2),"%")
    i=0
    j=0
   for i=0 to ubound(A)
      A(i)=c16to2(A(i))
   next
   for i=0 to ubound(A)-1
     DigS=instr(A(i),"0")
     Unicode=""
     for j=1 to DigS-1
       if j=1 then
         A(i)=right(A(i),len(A(i))-DigS)
         Unicode=Unicode & A(i)
       else
          i=i+1
          A(i)=right(A(i),len(A(i))-2)
          Unicode=Unicode & A(i)
       end if
     next
     if len(c2to16(Unicode))=4 then
        ConvChinese=ConvChinese & chrw(int("&H" & c2to16(Unicode)))
     else
        ConvChinese=ConvChinese & chr(int("&H" & c2to16(Unicode)))
     end if
   next
end function

'GB2312中文轉unicode(&#)的asp代碼  將GB編碼文字轉換為unicode編碼文字
function chinese2unicode(Str)
   dim i
   dim Str_one
   dim Str_unicode
   if(isnull(Str)) then
      exit function
   end if
   for i=1 to len(Str)
     Str_one=Mid(Str,i,1)
     Str_unicode=Str_unicode&chr(38)
     Str_unicode=Str_unicode&chr(35)
     Str_unicode=Str_unicode&chr(120)
     Str_unicode=Str_unicode& Hex(ascw(Str_one))
     Str_unicode=Str_unicode&chr(59)
   next
   chinese2unicode=Str_unicode
end function  

'URL地址編碼解碼函數
Function URLDecode(enStr)
dim deStr
dim c,i,v
deStr=""
for i=1 to len(enStr)
   c=Mid(enStr,i,1)
   if c="%" then
    v=eval("&h"+Mid(enStr,i+1,2))
    if v<128 then
     deStr=deStr&chr(v)
     i=i+2
    else
     if isvalidhex(mid(enstr,i,3)) then
      if isvalidhex(mid(enstr,i+3,3)) then
       v=eval("&h"+Mid(enStr,i+1,2)+Mid(enStr,i+4,2))
       deStr=deStr&chr(v)
       i=i+5
      else
       v=eval("&h"+Mid(enStr,i+1,2)+cstr(hex(asc(Mid(enStr,i+3,1)))))
       deStr=deStr&chr(v)
       i=i+3
      end if
     else
      destr=destr&c
     end if
    end if
   else
    if c="+" then
     deStr=deStr&" "
    else
     deStr=deStr&c
    end if
   end if
next
URLDecode=deStr
end function

'判斷是否為有效的十六進制代碼
function isvalidhex(str)
dim c
isvalidhex=true
str=ucase(str)
if len(str)<>3 then isvalidhex=false:exit function
if left(str,1)<>"%" then isvalidhex=false:exit function
   c=mid(str,2,1)
if not (((c>="0") and (c<="9")) or ((c>="A") and (c<="Z"))) then isvalidhex=false:exit function
   c=mid(str,3,1)
if not (((c>="0") and (c<="9")) or ((c>="A") and (c<="Z"))) then isvalidhex=false:exit function
end function



Function Post(url,data)
	dim Https
	set Https=server.createobject("MSXML2.XMLHTTP")
	Https.open "POST",url,false
	Https.setRequestHeader "Content-Type","application/x-www-form-urlencoded"
	Https.send data
	if Https.readystate=4 then
		dim objstream
		set objstream = Server.CreateObject("adodb.stream")
		objstream.Type = 1
		objstream.Mode =3
		objstream.Open
		objstream.Write Https.responseBody
		objstream.Position = 0
		objstream.Type = 2
		objstream.Charset = "utf-8"
		Post = objstream.ReadText
		objstream.Close
		set objstream = nothing
		set https=nothing
	end if
End Function


Function gen_key(digits)	
	'Create and define array
	dim char_array(50)
	char_array(0) = "0"
	char_array(1) = "1"
	char_array(2) = "2"
	char_array(3) = "3"
	char_array(4) = "4"
	char_array(5) = "5"
	char_array(6) = "6"
	char_array(7) = "7"
	char_array(8) = "8"
	char_array(9) = "9"
	
	'Initiate randomize method for default seeding
	randomize
	
	'Loop through and create the output based on the the variable passed to
	'the function for the length of the key.
	do while len(output) < digits
	num = char_array(Int((9 - 0 + 1) * Rnd + 0))
	output = output + num
	loop
	
	'Set return
	gen_key = output
End Function


Dim mobile
mobile = request("mobile")	'登錄用戶名


    if mobile="" then
       response.Write("手機號碼不能為空")
    else
		
		if request.Form("send_code") = "" or Session("send_code")<>request.Form("send_code") then
			'防用戶惡意請求
			response.Write("請求超時，請刷新頁面后重試")
		else	
			     
			dim target,post_data,content,res,mobile_code
			mobile_code = gen_key(4)
			Session("mobile_code") = mobile_code
			'Response.Cookies("mobile_code") = mobile_code
			Session("mobile") = mobile
			'Response.Cookies("mobile") = mobile
			target = "http://api.isms.wx96.com/webservice/isms.php?method=Submit"
			content = toUTF8("Your verification code is "&mobile_code)
			post_data = "account=用戶名&password=密碼&mobile="&mobile&"&content="&content
			'密碼為APIKEY（可以登錄用戶中心查看）
			'response.Write(UTF2GB(Post(target,post_data)))
	
			tempstr = UTF2GB(Post(target,post_data))
			'if instr(tempstr,"提交成功")>0 Then
				'response.Write("true") 
			'else
				'response.Write("error") 
			'end if
	
			Dim len1,len2
			len1 = instr(1,tempstr,"/code>",1)-1
			len2 = instr(1,tempstr,"code>",1)
			'response.Write(len2)
			code=left(tempstr,len1)
			code=right(code,(len1-len2-5))
			'response.Write(code)
	
			Dim len3,len4
			len3 = instr(1,tempstr,"/msg>",1)-1
			len4 = instr(1,tempstr,"msg>",1)
			'response.Write(len2)
			msg=left(tempstr,len3)
			msg=right(msg,(len3-len4-4))
			response.Write(msg)
			
		end if

    end If
%>